Руководство Пользователя для Panasonic DMC-LS80

Скачать
Страница из 124
41
VQT1L50
Advanced-Shooting
The available fl ash range to take 
pictures in intelligent ISO are as 
follows:
ISO LIMIT 
Available fl ash range
ISO MAX400 60 cm (1.97 feet) to 3.7 m 
(12.14 feet) (Wide)
40 cm (1.31 feet) to 2.0 m 
(6.56 feet) (Tele)
ISO MAX800 80 cm (2.62 feet) to 5.3 m 
(17.39 feet) (Wide)
60 cm (1.97 feet) to 2.9 m 
(9.51 feet) (Tele)
ISO MAX
1250
1.0 m (3.28 feet) to 6.6 m 
(21.65 feet) (Wide)
80 cm (2.62 feet) to 3.6 m 
(11.81 feet) (Tele)
  Shutter speed for each fl ash mode
Flash mode
Shutter speed (sec.)
r
 : AUTO
1/30 to 1/2000
s
 : AUTO/
Red-eye 
reduction
1/30 to 1/2000
t
 : Forced ON
q
 : Forced 
ON/Red-eye 
reduction
1/30 to 1/2000
u
 : Slow  sync./
Red-eye 
reduction
1/8 or
1 to 1/2000*
1
v
  : Forced OFF 1/4 or 1 to 1/2000*
2
1/8 or 1 to 1/2000*
3
*
1
 [NIGHT PORTRAIT] or [CANDLE 
LIGHT] mode
*
2
 When intelligent ISO is set or in 
[SPORTS], [BABY] or [PET] mode
*
3
 When in normal picture mode [
], 
[NIGHT PORTRAIT] or [CANDLE LIGHT] 
mode
The shutter speed reaches the maximum 
of 1 second for *1, *2 and *3 when:
Optical Image Stabilizer is [OFF]
When the Optical Image Stabilizer 
is set to [MODE1] or [MODE2] and 
the camera determines that there is 
minimum possibility of blurring.

The shutter speed will be different from 
that shown in the table in the following 
scene modes.
[NIGHT SCENERY]: 
1/8th of a second or 8 seconds to 
1/2000th of a second
[STARRY SKY]: 
15 seconds, 30 seconds, 60 seconds
[FIREWORKS]: 
1/4th of a second, 2 seconds
Other scene modes:
1/8th of a second to 1/2000th of a second
Do not look directly at the fl ash at 
close range when it is activated.
Do not bring the fl ash too close to 
objects or close the fl ash while it 
is activated. The objects may be 
discolored by its heat or lighting.
While the fl ash is charged, the LCD 
monitor turns off and you cannot take 
pictures. The status indicator lights up. 
If the remaining battery power is low, 
the screen may be turned off for a 
longer period of time.
When you take a picture beyond the 
available fl ash range, the exposure may 
not be adjusted properly and the picture 
may become bright or dark.
When the fl ash icon blinks, the fl ash is 
being charged and you cannot take a 
picture even when you press the shutter 
button fully.
The white balance may not be properly 
adjusted if the photo fl ash is insuffi cient.
When the shutter speed is fast, the fl ash 
effect may not be suffi cient.
When you repeat taking a picture, 
recording may be disabled even if the 
fl ash is activated. Take a picture after the 
access indication disappears.
The red-eye reduction effect differs 
between people. Also, if the subject was 
far away from the camera or was not 
looking at the fi rst fl ash, the effect may 
not be evident.
In burst mode or auto bracket mode, you 
cannot use the fl ash.
VQT1L50_DMC-LS80_P-PC.indd   41
VQT1L50_DMC-LS80_P-PC.indd   41
2007/12/31   16:03:47
2007/12/31   16:03:47