Справочник Пользователя для Panasonic aj-hdc27
61
Saving the data settings on the
card
card
Select the file No.
Give a title to the selected file.
Setup card operations
1
Perform the menu operations (pages 70 to 72),
and display the “CAM CARD READ/WRITE”
screen.
and display the “CAM CARD READ/WRITE”
screen.
n
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
READ USER DATA
TITLE :
4
Turn the JOG dial button to move the arrow
(cursor) to the TITLE item.
(cursor) to the TITLE item.
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
READ USER DATA
m
TITLE :
2
Turn the JOG dial button to move the arrow
(cursor) to the SELECT item which comes after
WRITE, and press the JOG dial button.
(cursor) to the SELECT item which comes after
WRITE, and press the JOG dial button.
3
Turn the JOG dial button to select a number from 1
to 8, and press the JOG dial button.
to 8, and press the JOG dial button.
5
When the JOG dial button is pressed, the arrow
(cursor) starts flashing, and the input mode is
established.
(cursor) starts flashing, and the input mode is
established.
6
Turn the JOG dial button until the character to be
set appears. When the button is turned, the
character displayed is switched in the following
sequence:
set appears. When the button is turned, the
character displayed is switched in the following
sequence:
Space: )
7
letters: A—Z
7
numbers: 0—9
7
symbols: ’, >, <, /, –
8
Turn the JOG dial button to move the arrow
(cursor) to the next position (right), and repeat
steps
(cursor) to the next position (right), and repeat
steps
5
to
7
to set the characters (maximum of 8).
7
Press the JOG dial button to enter the character.
< CAM CARD READ/WRITE >
SELECT :1
READ
n
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
READ USER DATA
TITLE :
< CAM CARD READ/WRITE >
SELECT :1
READ
SELECT :1
WRITE
CARD CONFIG
READ USER DATA
READ USER DATA
m
TITLE :