Руководство Пользователя для Panasonic th-32lru20

FMA-101 OVERVIEW

PURPOSE AND DEFINITION

The Panasonic Free-To-Guest (FTG) Basic platform delivers FTG channels to the guest rooms
with minimal headend equipment installed. The FTG Basic platform uses an FTG Management
Appliance (FMA-101) to configure and deliver the channel lineup to the guest room terminals
via the hotel’s coaxial distribution network.

This document provides the steps to install, configure, and troubleshoot the FMA-101 used in
the FTG Basic platform.

PROCEDURE REQUIREMENTS

Installation and configuration of the FMA-101 requires the following hardware, tools, and
software.

 FMA-101

 Minimum termcode requirements:

HC11 – 2.58 or higher

HC12 – 6.02 or higher

 Laptop or tablet with Ethernet port

 Ethernet crossover cable (for laptop or tablet

access)

 Ethernet straight-through cable (for

hotel network access)

 Coaxial jumper cables

 Sencore SLM 1456 meter or

equivalent

 Low Pass Filter (6ELP-50 or 6MLP-50)

TIPS AND WARNINGS

FMA-101 Configuration
 The FMA-101 configuration must be performed on site. Remote connectivity for

configuration or troubleshooting is not available.

 The FMA-101 should be installed in the FTG rack prior to configuration.

 If the configuring laptop is running Windows Vista or Windows 7, resetting the power on the

FMA-101 while the laptop is connected may cause a network conflict issue. To correct a
network conflict, disable and then enable the network interface on the laptop and refresh
the browser page.

 To access the FMA-101 web page, open a browser and type http://fma101 in the address

bar.

 The FMA-101 can be configured as a DHCP client or assigned a default IP address.

DHCP client configuration: