Справочник Пользователя для Mobile Crossing map loader
19
from a CD-ROM. You may also be able to get these from a
friend. If they are zipped you will need to unzip them and
copy the contents into the directory created in step 1.
friend. If they are zipped you will need to unzip them and
copy the contents into the directory created in step 1.
3.
You will also need two files in this same directory. These are
the FileIndex.xml and the FileIndex_short.xml. These files
are in a separate zip file that should be downloaded and
unzipped into the same place. These files are also located
on the Flash Disk if you have ever downloaded any files from
the web site and may be copied to the card.
the FileIndex.xml and the FileIndex_short.xml. These files
are in a separate zip file that should be downloaded and
unzipped into the same place. These files are also located
on the Flash Disk if you have ever downloaded any files from
the web site and may be copied to the card.
4.
Once the files are located on the card you can use it for map
loading just like the one purchased from Mobile Crossing.
(The one from Mobile Crossing may contain extra features
such as autorun.)
loading just like the one purchased from Mobile Crossing.
(The one from Mobile Crossing may contain extra features
such as autorun.)
Note that there may be duplicate files in the various regions. They
are identical and can be overwritten if you wish when making the
copies.
are identical and can be overwritten if you wish when making the
copies.
Map Loading Steps
The steps to load a map are described in this section. The program
itself will sense the Map Card and use it if it is available. Otherwise
the program will attempt to retrieve the maps from the internet. If
you have a Map Loader equipped card please insert it before
beginning the process. If you will need an Internet connection, it
should be established before starting Map Loader.
itself will sense the Map Card and use it if it is available. Otherwise
the program will attempt to retrieve the maps from the internet. If
you have a Map Loader equipped card please insert it before
beginning the process. If you will need an Internet connection, it
should be established before starting Map Loader.
1.
Use the process shown in "Starting the WayPoint Map
Loader" on page 3 to start the program and use the Next
commands to move to the Main Menu.
Loader" on page 3 to start the program and use the Next
commands to move to the Main Menu.
2.
From the Main Menu select the destination for the maps. Tap
Build Base Map to place the maps on your Flash Disk. Tap
Build Map Card to place the maps on your SD card. Once
you have selected the destination a screen will appear to
Build Base Map to place the maps on your Flash Disk. Tap
Build Map Card to place the maps on your SD card. Once
you have selected the destination a screen will appear to