Техническая Инструкция для Panasonic DBS 576
Section 700 - Operation
Chapter 4. User Maintenance
576-50-700
DBS 576 (USA) issued September 2001
4-23
Related Programming
•
N/A
Considerations
•
N/A
Set Send Text Messages
Description
You can send a text message to a key telephone with a display when you are sending call waiting
signal (Auto camp-on or manual camp-on). This menu item specifies the text messages that may be
sent.
Operation
To set Send Text Messages using either a large-display or small-display phone:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
81-
User MAINT displays
User MAINT displays
2. At the 81 level, enter 11.
3. Press the HOLD key.
8111-
Text Message displays
Text Message displays
4. Enter 0.
5. Press the HOLD key.
8111-0:
Send Message displays
Send Message displays
6. Press the HOLD key.
Enter Msg # displays
7. Enter the Message number (0-9).
8. Press the HOLD key.
A B C D E F
X
displays (where X = Send Text Message
number)
9. Enter the Text Message (up to 15 characters):
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
4-19.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note: Press the FLASH key to clear any existing data.