Техническое Руководство для Wolf 315i

The overlay door panel design allows for a decorative

panel to cover the door trim for a seamless appearance

that will compliment surrounding cabinetry. You may also

choose to match the handle hardware of surrounding

cabinetry. 

The overlay door panel applied to the Model UC-24B will

consist of only a frame and will affix directly to the door

with screws through a series of predrilled holes in the

perimeter of the door.

The glass door opening of the Model UC-24B is designed

to be exposed to room air circulation. Decorative overlays

on the glass should be kept to a minimum. Rails and stiles

must be a minimum of 2

1

/

4

" (57) wide. They can be

increased in size but should not exceed cabinet manufac-

turers’ standard width. Rails and stiles cannot exceed the

overall door panel dimensions specified in the chart below,

as they would interfere with the operation of the door. The

back sides of rails and stiles that will be visible through

the glass door will need to be finished. Also, the inside

edges of the frames must be finished to match the front

surface.

IMPORTANT NOTE: The weight of the door panel cannot

exceed 10 lbs (5 kg).

When planning to install an Undercounter model next to

adjoining cabinetry, you must make provisions to allow the

door to open to a maximum of 145˚ and not hit the door

panel. Refer to the full-scale illustration at the end of this

section.

Refer to the following chart and the Overlay Door Panel

illustration for panel specifications for Model UC-24B.

Door Panel Width

23

3

/

4

"

(603)

Door Panel Height

30

1

/

16

"

(764)

Width of Rails and Stiles

2

1

/

4

"

(57) 

min

Door Panel Weight

10 lbs (5 kg) max

Panel Thickness

5

/

8

"

(16) 

min

W

H