Техническое Руководство для Wolf 315i

Refer to the illustrations and specifications

for overall dimensions, finished rough opening
dimensions and installation specifics.

The Undercounter unit must be installed to

open a minimum of 90˚ or you will have
problems pulling the utility bin out. 

For corner installations, you need allow for a

minimum 3" (76) filler so the door can open to
90˚. If you are using some larger handle
hardware, you will also need to take that into
account.

The anti-tip bracket must be installed to

prevent the unit from tipping forward.

When planning to install the Undercounter

unit next to adjoining cabinetry, you must make
provisions to allow the door to open to a
maximum of 145˚ and not interfere with the
door panel. Refer to the full-scale illustration on
page 8 for cabinetry dimensions.

For the overlay application, you will need to

provide a decorative door panel. Refer to the
overlay door panel information on page 6. You
must also supply your own handle hardware.

For the overlay application, the weight limit

for the decorative door panel is 20 lbs (9 kg).
The panel must be a minimum of 

5

/

8

" (16) thick.

A 115 V AC, 60 Hz, 15 amp fused electrical

supply is required. It is recommended that a
separate circuit, serving only this appliance, be
provided.

The Model UC-24R is equipped with a power

supply cord with a 3-prong grounding plug
which must be plugged into a mating 3-prong
grounding type wall receptacle. The electrical
outlet must be placed so the grounding prong
is to the right of the thinner blades. The
outlet must be flush with the back wall. Locate
electrical within the shaded area shown in the
installation illustration on page 4.

You must follow all National Electrical Code

regulations. In addition, be aware of local codes
and ordinances when installing your service.

Refer to the Undercounter Installation

Instructions packed with the appliance, which
provides step-by-step procedures for making
sure the unit is installed properly.