Инструкция для Sony cdx-gt920u
15
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
desired menu item appears, then
press it.
3
Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
the setting, then press it.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
*1 When CD/USB source is activated.
*2 When AUX source is activated.
*2 When AUX source is activated.
Customizing the equalizer curve
— EQ3 Tune
— EQ3 Tune
“Custom” of EQ3 allows you to make your own
equalizer settings.
equalizer settings.
1
Select a source, then press the multi
way encoder.
way encoder.
2
Rotate the multi way encoder to select
“EQ3 parametric,” then press it.
“EQ3 parametric,” then press it.
3
Rotate the multi way encoder to select
“Custom,” then push it right.
“Custom,” then push it right.
4
Rotate the multi way encoder to select
“EQ3 Mode Tune,” then press it.
“EQ3 Mode Tune,” then press it.
5
Rotate the multi way encoder to select
the desired frequency range from
“LOW,” “MID” or “HI,” then press it.
the desired frequency range from
“LOW,” “MID” or “HI,” then press it.
6
Rotate the multi way encoder to select
the center frequency you wish to
adjust, then press it.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
the center frequency you wish to
adjust, then press it.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7
Rotate the multi way encoder to adjust
the equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
the equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
8
Press the multi way encoder.
Repeat steps 5 to 8 to adjust other frequency
ranges.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9
Push (BACK) down twice.
The display returns to normal play/reception
mode.
The display returns to normal play/reception
mode.
To restore the factory-set equalizer curve,
select “EQ3 Mode Initialize” and “Yes” in
step 4.
select “EQ3 Mode Initialize” and “Yes” in
step 4.
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
EQ3 parametric
To select an equalizer type: “Xplod,” “Vocal,”
“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”
or “off” (
“Edge,” “Cruise,” “Space,” “Gravity,” “Custom”
or “off” (
z
).
DM+*
1
To set the DM+ function “on” (
z
) or “off”
(page 4).
DSO
To select the DSO mode: “1,” “2,” “3” or “off”
(
(
z
). The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: “R10” – “0” (
speakers: “R10” – “0” (
z
) – “L10”
Fader
To adjust the balance between the front and rear
speakers: “F10” – “0” (
speakers: “F10” – “0” (
z
) – “R10”
Subwoofer
To adjust the subwoofer volume: “+10” – “0”
(
(
z
) – “–10”
(“–
∞” is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
(
z
), “125Hz” or “78Hz.”
AUX Level*
2
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” (
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: “+18 dB” – “0 dB” (
z
) –
“–8 dB”