Руководство По Работе для Sony cdx-gt170

Скачать
Страница из 52
16
Error displays/Messages
If these solutions do not help improve the situation, 
consult your nearest Sony dealer.
If you take the unit to be repaired because of CD 
playback trouble, bring the disc that was used at the 
time the problem began.
Radio reception
The stations cannot be received.
The sound is hampered by noises.
• Connect a power antenna (aerial) control lead (blue) 
or accessory power supply lead (red) to the power 
supply lead of a car’s antenna (aerial) booster (only 
when your car has built-in FM/MW/SW antenna 
(aerial) in the rear/side glass).
• Check the connection of the car antenna (aerial).
• The auto antenna (aerial) will not go up.
t Check the connection of the power antenna 
(aerial) control lead.
• Check the frequency.
Preset tuning is not possible.
• Store the correct frequency in the memory.
• The broadcast signal is too weak.
Automatic tuning is not possible.
• Setting of the local seek mode is not correct.
t Tuning stops too frequently:
t Tuning does not stop at a station:
Set “MONO-ON” (page 10).
• The broadcast signal is too weak.
t Perform manual tuning.
During FM reception, the “ST” indication 
flashes.
• Tune in the frequency accurately.
• The broadcast signal is too weak.
t Set “MONO-ON” (page 10).
An FM program broadcast in stereo is heard in 
monaural.
The unit is in monaural reception mode.
t Set “MONO-OFF” (page 10).
*1 CDX-GT370S/GT370 only
*2 CDX-GT370S/GT370/GT270S/GT270 only
*3 CDX-GT270S/GT270/GT170S/GT170 only
BLANK (CDX-GT370S/GT370 only)
Tracks have not been recorded on the MD.
*
1
t Play an MD with recorded tracks.
ERROR*
2
• The disc is dirty or inserted upside down.
*
1
t Clean or insert the disc correctly.
• A blank disc has been inserted.
• The disc cannot play due to a problem.
t Insert another disc.
FAILURE
The connection of speakers/amplifiers is incorrect.
t See the installation/connections manual of this 
model to check the connection.
LOAD
The unit/changer is loading the disc.
t Wait until loading is complete.
L. SEEK +/–
The local seek mode is on during automatic tuning.
NO DISC (CDX-GT370S/GT370 only)
The disc is not inserted in the CD/MD changer.
t Insert discs in the changer.
NO INFO (CDX-GT370S/GT370/GT270S/GT270 
only)
Text information is not written in the MP3/WMA file.
NO MAG (CDX-GT370S/GT370 only)
The disc magazine is not inserted in the CD changer.
t Insert the magazine in the changer.
NO MUSIC
The disc does not contain a music file.
t Insert a music CD in this unit or MP3 playable 
changer.
NO NAME
A disc/track name is not written in the track.
NOTREADY (CDX-GT370S/GT370 only)
The lid of the MD changer is open or the MDs are not 
inserted properly.
t Close the lid or insert the MDs properly.
OFFSET
There may be an internal malfunction.
t Check the connection. If the error indication 
remains on in the display, consult your nearest 
Sony dealer.
PUSH EJT (CDX-GT270S/GT270/GT170S/GT170 
only)
The disc cannot be ejected.
t Press Z (eject) (page 6).
READ
The unit is reading all track and album information on 
the disc.
t Wait until reading is complete and playback starts 
automatically. Depending on the disc structure, it 
may take more than a minute.
RESET (CDX-GT370S/GT370 only)
The CD unit and CD/MD changer cannot be operated 
due to a problem.
t Press the RESET button (page 5).
”  or  “
During reverse or fast-forward, you have reached the 
beginning or the end of the disc and you cannot go any 
further.
The character cannot be displayed with the unit.
*1 The disc number of the disc causing the error 
appears in the display.
*2 If an error occurs during playback of a CD or MD, 
the disc number of the CD or MD does not appear 
in the display.