Справочник Пользователя для Pentax M50

Скачать
Страница из 212
22
1
Gettin
g
 Sta
rte
d
Powering the Camera
Use the battery charger to charge the battery before using it in the 
camera for the first time or after a long period of non-use, or when the 
[Battery depleted] message appears.
Note: AC plug cord  “Listed, Type SPT-2 or NISPT-2, 18/2 flexible cord, 
rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger D-BC78.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the charger so that the PENTAX 
logo is facing up.
The charging indicator lights while the battery is charging and turns off 
when charging is finished.
4
Remove the battery from the battery charger when 
charging is finished.
Charging the Battery
• The time required to fully charge the battery is about 150 minutes (max.). The 
appropriate ambient temperature for charging the battery is 0°C to 40°C (32°F 
to 104°F). (The charging time may vary depending on the ambient 
temperature and charging conditions.)
• The battery has reached the end of its service life when it starts to run down 
soon after being charged. Replace with a new battery.
• Do not use the battery charger to charge batteries other than the rechargeable 
lithium-ion battery D-LI78, as the charger may overheat or be damaged.
• If the battery is inserted correctly but the charging indicator fails to light, the 
battery may be faulty. Replace with a new battery.
Battery charger
3
Battery
To power 
outlet
AC plug cord
1
2
Charging indicator
While charging: Lights
Charging finished: Turns off