Справочное Руководство для 3com 8807
Password Control Configuration Commands
1093
Use the password-control login-attempt attempt-time exceed command to
configure the processing mode used after password attempt fails.
configure the processing mode used after password attempt fails.
Example
# Configure the aging time of the system login passwords to 100 days.
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] password-control aging 100
# Configure the minimum length of the system login passwords to 8 characters.
[SW8800] password-control length 8
# Configure the number of password attempts allowed for each user to 5.
[SW8800] password-control login-attempt 5
# Configure the maximum number of history password records allowed for each
user to 10.
user to 10.
[SW8800] password-control history 10
# Configure the alert time so that users are alerted 7 days before their passwords
expire.
expire.
[SW8800] password-control alert-before-expire 7
# Configure the timeout time of the user password authentication to 100 seconds.
[SW8800] password-control authentication-timeout 100
# Configure the processing mode so that the system locks the user after failed
password authentication attempts and allow the user to log in to the switch again
360 minutes later.
password authentication attempts and allow the user to log in to the switch again
360 minutes later.
[SW8800] password-control login-attempt 3 exceed locktime 360
password-control enable
Syntax
password-control { aging | length | history } enable
undo password-control { aging | length | history } enable
View
System view
Parameter
None
Description
Use the password-control enable commands to enable the password control
function of the system. The specific usage is as follows:
function of the system. The specific usage is as follows: