Справочное Руководство для 3com 8807
BGP Configuration Commands
509
Description
Use the display bgp peer command to view the information about BGP peers.
Example
# Display the detail information of the peer 201.1.1.2.
<SW8800> display bgp peer 201.1.1.2 verbose
Peer: 201.1.1.2+179 Local: 200.1.1.1+1195
Type: External
State: Established Flags: <>
Expiring Time: 00:02:19
Last State: OpenConfirm Last Event: RecvKeepAlive
Last Error: None
Options: <KeepAll Ttl>
Peer Version: 4 Peer ID: 201.1.1.2 Local ID: 200.1.1.1
Active Holdtime: 180s, Keepalive: 60s
Last traffic (seconds): Received 41 Sent 41 Checked 41
Input messages: Total 4 Updates 1 Octets 125
Output messages: Total 4 Updates 1 Octets 148
Route Queue Timer: unset
Peer capabilities:
Route refresh: advertised and received
Ipv4-family Unicast: advertised and received
Configuration within the peer :
no export policy route-policy
no export policy ip-prefix
no export policy filter-policy
no export policy acl
no import policy route-policy
no import policy ip-prefix
no import policy filter-policy
no import policy acl
no default route produce
display bgp
routing-table
Syntax
display bgp routing-table [ ip-address [ mask ] ]
View
Any view
Table 73 Description of the fields of the display bgp peer verbose command
Field
Description
Peer
IP address of peer and port number used by the peer to establish TCP connection
Local
IP address and port number used to establish TCP connection of local end
Type
Type of peer: Internal for IBGP, and External for EBGP
State
State of peer
Flags
Flags of peer
Last State Last state before entering the current state
Last Event Last event of neighbor state machine
Last Error
Last error of neighbor state machine
Options
Options