Справочное Руководство для 3com 8807
744
C
HAPTER
40: BGP/MPLS VPN C
ONFIGURATION
C
OMMANDS
Parameter
group-name: Name of a neighbor peer group, consisting of 1 to 47 alphanumeric
characters.
characters.
peer-address: Peer IP address in dotted decimal notation.
keepalive-interval: Interval, in seconds, of sending the Keepalive message. It
ranges from 1 to 65535 and defaults to 60.
ranges from 1 to 65535 and defaults to 60.
holdtime-interval: Holdtime, in seconds. It ranges from 3 to 65535 and defaults to
180.
180.
Description
Use the peer timer command to set the Keepalive interval and holdtime for peers.
Use the undo peer timer command to restore the default setting.
The timer set with the peer timer command enjoys higher precedence than the
timer with the timer command.
timer with the timer command.
Related command: timer keep-alive hold.
Example
# Set the Keepalive interval and holdtime for the peer group test.
[3Com-bgp-af-vpn-instance] peer test timer keep-alive 60 hold 180
peer upe
Syntax
peer peer-address upe
undo peer peer-address upe
View
VPNv4 sub-address family view
Parameter
peer-address: Peer IP address.
Description
Use the peer upe command to configure BGP peer as the UPE of hierarchical
BGP/MPLS VPN.
BGP/MPLS VPN.
Use the undo peer upe command to delete this configuration.
Example
# Configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.
[3Com-bgp] ipv4-family vpnv4
[3Com-bgp-af-vpn] peer 1.1.1.1 upe
peer vpn-instance
enable
Syntax
peer group-name vpn-instance vpn-instance-name enable