Руководство Пользователя для 3com 8807
Displaying and Maintaining NQA
865
<SW8800>system-view
System View: return to User View with Ctrl+Z.
[SW8800] nqa administrator icmp
# Configure the test type as icmp.
[SW8800-nqa-administrator-icmp] test-type icmp
# Configure the destination IP to 192.168.80.80.
[SW8800-nqa-administrator-icmp] destination-ip 192.168.80.80
# Configure the test times to 5.
[SW8800-nqa-administrator-icmp] count 5
4 Execute the test
# Execute one test.
[SW8800-nqa-administrator-icmp] test-enable
5 Display the test results
# Display the results of this test in this test group.
<SW8800> display
nqa
results administrator icmp
nqa
entry(admin administrator, tag icmp) test results:
Destination ip address:192.168.80.80
Vpn-instance: NULL
Send operation times: 5 Receive response times: 5
Min/Max/Average Round Trip Time: 21/33/25
Square-Sum of Round Trip Time: 3557
Last complete test time: 2005-12-8 11:22:33.4
Extended result:
Packet lost in test: 0%
Disconnect operation number:0 Operation timeout number:0
System busy operation number:0 Connection fail number:0
Operation sequence errors:0 Drop operation number:0
Other operation errors:0
Displaying and
Maintaining NQA
Maintaining NQA
Use the display command to display the operation status after the above
configurations. Verify the configuration effect through the displayed information.
configurations. Verify the configuration effect through the displayed information.
Table 819 Display and maintain NQA
Operation
Command
Display the configuration information
display current-configuration or display
this in NQA test group view
this in NQA test group view
Display the test results
display nqa { results | history } [
administrator-name test-tag ]
administrator-name test-tag ]