Инструкции По Установке для 3com S7906E
1-10
To do...
Use the command...
Remarks
Create an MSDP peer
connection
connection
peer peer-address
connect-interface
interface-type interface-number
connect-interface
interface-type interface-number
Required
No MSDP peer connection
created by default
created by default
If an interface of the router is shared by an MSDP peer and a BGP/MBGP peer at the same time, we
recommend that you use the IP address of the BGP/MBGP peer as the IP address of the for the MSDP
peer.
Configuring a Static RPF Peer
Configuring static RPF peers avoids RPF check of SA messages.
Follow these steps to configure a static RPF peer:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter public instance MSDP
view or VPN instance MSDP
view
view or VPN instance MSDP
view
msdp [ vpn-instance
vpn-instance-name ]
vpn-instance-name ]
—
Configure a static RPF peer
static-rpf-peer peer-address
[ rp-policy ip-prefix-name ]
[ rp-policy ip-prefix-name ]
Required
No static RPF peer configured
by default
by default
If only one MSDP peer is configured on a router, this MSDP will be registered as a static RPF peer.
Configuring an MSDP Peer Connection
Configuration Prerequisites
Before configuring MSDP peer connection, complete the following tasks:
z
Configure any unicast routing protocol so that all devices in the domain are interoperable at the
network layer.
z
Configuring basic functions of MSDP
Before configuring an MSDP peer connection, prepare the following data: