Инструкции По Установке для 3com S7906E

 

1-22 

    Incoming/outgoing SA responses: 0/0 

    Incoming/outgoing data packets: 0/0 

z 

There are two ASs in the network, AS 100 and AS 200 respectively. OSPF is running within each 

AS, and BGP is running between the two ASs.  

z 

PIM-SM 1 belongs to AS 100, while PIM-SM 2 and PIM-SM 3 belong to AS 200. 

z 

Each PIM-SM domain has zero or one multicast source and receiver. OSPF runs within each 

domain to provide unicast routes.  

z 

PIM-SM 2 and PIM-SM 3 are both stub domains, and BGP or MBGP is not required between these 

two domains and PIM-SM 1. Instead, static RPF peers are configured to avoid RPF check on SA 

messages.  

z 

It is required that the respective loopback 0 of Switch B, Switch C and Switch E be configured as 

the C-BSR and C-RP of the respective PIM-SM domains.  

z 

It is required that Switch C and Switch E be configured as static RPF peers of Switch B, and Switch 

B be configured as the only static RPF peer of Switch C and Switch E, so that any switch can 

receive SA messages only from its static RPF peer(s) and permitted by the corresponding filtering 

policy.