Инструкции По Установке для 3com S7906E

 

1-9 

z 

Configurations made in IGMP snooping view are effective for all VLANs, while configurations made 

in VLAN view are effective only for ports belonging to the current VLAN. For a given VLAN, a 

configuration made in IGMP snooping view is effective only if the same configuration is not made in 

VLAN view.  

z 

Configurations made in IGMP snooping view are effective for all ports; configurations made in 

Ethernet interface view are effective only for the current port; configurations made in Layer 2 

aggregate interface view are effect only for the current interface; configurations made in port group 

view are effective only for all the ports in the current port group. For a given port, a configuration 

made in IGMP snooping view is effective only if the same configuration is not made in Ethernet 

interface view, Layer 2 aggregate interface view or port group view.  

z 

For IGMP snooping, configurations made on a Layer 2 aggregate interface do not interfere with 

configurations made on its member ports, nor do they take part in aggregation calculations; 

configurations made on a member port of the aggregate group will not take effect until it leaves the 

aggregate group.  

 

Before configuring the basic functions of IGMP snooping, complete the following task:  

z 

Configure the corresponding VLANs. 

Before configuring the basic functions of IGMP snooping, prepare the following data:  

z 

Version of IGMP snooping. 

Follow these steps to enable IGMP snooping: 

Enter system view 

— 

Enable IGMP snooping globally and 
enter IGMP-Snooping view  

Required 

Disabled by default  

Return to system view 

quit 

— 

Enter VLAN view 

vlan vlan-id 

— 

Enable IGMP snooping in the VLAN  igmp-snooping enable 

Required 

Disabled by default