Инструкции По Установке для 3com S7906E

 

1-11 

z 

Configure any IPv6 unicast routing protocol so that all devices in the domain can be interoperable 

at the network layer. 

z 

Configure IPv6 PIM-DM or IPv6 PIM-SM. 

In addition, prepare the following data: 

z 

MLD version 

z 

IPv6 multicast group address and IPv6 multicast source address for static group member 

configuration 

z 

ACL rule for IPv6 multicast group filtering 

z 

The maximum number of IPv6 multicast groups that can be joined on an interface 

Enable MLD on the interface on which IPv6 multicast group memberships are to be created and 

maintained. 

Follow these steps to enable MLD: 

Enter system view 

system-view 

— 

Enable IPv6 multicast routing 

Required 

Disable by default 

Enter interface view 

interface interface-type interface-number 

— 

Enable MLD 

Required 

Disabled by default 

 

For details about the multicast ipv6 routing-table command, see IPv6 Multicast Routing and 

Forwarding Commands in the IP Multicast Volume. 

 

Because MLD message types and formats vary with MLD versions, the same MLD version should be 

configured for all routers on the same subnet before MLD can work properly. 

Follow these steps to configure an MLD version globally: 

Enter system view 

system-view 

— 

Enter MLD view 

— 

Configure an MLD version 
globally 

version version-number 

Optional 

MLDv1 by default