Инструкции По Установке для 3com S7906E
1-24
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter MLD-Snooping view
mld-snooping
—
Configure 802.1p precedence
for MLD Messages
for MLD Messages
dot1p-priority priority-number
Required
The default 802.1p precedence
for MLD messages is 0.
for MLD messages is 0.
Configuring 802.1p precedence for MLD messages in a VLAN
Follow these steps to configure 802.1p precedence for MLD messages in a VLAN:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter VLAN view
vlan vlan-id
—
Configure 802.1p precedence
for MLD Messages
for MLD Messages
mld-snooping dot1p-priority
priority-number
priority-number
Required
The default 802.1p precedence
for MLD messages is 0.
for MLD messages is 0.
Displaying and Maintaining MLD Snooping
To do…
Use the command...
Remarks
Display MLD snooping multicast
group information (on a distributed
device)
group information (on a distributed
device)
display mld-snooping group [ vlan
vlan-id ] [ slot slot-number ]
[ verbose ]
vlan-id ] [ slot slot-number ]
[ verbose ]
Available in any
view
view
Display information about MLD
Snooping multicast groups (on a
distributed IRF device)
Snooping multicast groups (on a
distributed IRF device)
display mld-snooping group [ vlan
vlan-id ] [ chassis chassis-number
slot slot-number ] [ verbose ]
vlan-id ] [ chassis chassis-number
slot slot-number ] [ verbose ]
Available in any
view
view
Display the statistics information of
MLD messages learned by MLD
snooping
MLD messages learned by MLD
snooping
display mld-snooping statistics
Available in any
view
view
Clear MLD snooping multicast group
information
information
reset mld-snooping group
{ ipv6-group-address | all } [ vlan
vlan-id ]
{ ipv6-group-address | all } [ vlan
vlan-id ]
Available in user
view
view
Clear the statistics information of all
kinds of MLD messages learned by
MLD snooping
kinds of MLD messages learned by
MLD snooping
reset mld-snooping statistics
Available in user
view
view
z
The reset mld-snooping group command works only on an MLD snooping–enabled VLAN, but
not on a VLAN with MLD enabled on its VLAN interface.
z
The reset mld-snooping group command cannot clear the MLD snooping multicast group
information for static joining.