Инструкции По Установке для 3com S7906E

 

1-13 

Create a Kompella connection 

connection [ ce-offset id ] 
interface interface-type 
interface-number 
[ tunnel-policy 
tunnel-policy-name ] 

Required 

 

 

At present, an MPLS L2VPN connection based on Layer 2 Ethernet interface and VLAN supports only 

LDP signaling negotiation, that is, only the Martini method support establishing MPLS L2VPN 

connection based on Layer 2 Ethernet interface and VLAN. 

 

If you create a Martini MPLS L2VPN connection on a VLAN interface, all packets carrying the VLAN tag 

will be forwarded through the connection, regardless of the Layer 2 Ethernet ports receiving the packets. 

This not only wastes the Layer 2 Ethernet interface and VLAN resources, but also cannot differentiate 

users and services connected to different Layer 2 Ethernet interfaces. 

MPLS L2VPN connections based on Layer 2 Ethernet interface and VLAN can solve the above 

problems. Such connections forward packets based on the inbound Layer 2 Ethernet interfaces and the 

VLAN tags in the packets. In other words, only packets that are received on the same Layer 2 Ethernet 

interface and carry the same VLAN tag are forwarded through the same MPLS L2VPN connection. 

To configure a connection based on Layer 2 Ethernet interface and VLAN, you need to create a service 

instance on the Layer 2 Ethernet interface, configure a packet matching rule for the service instance, 

and create a Martini MPLS L2VPN connection. After these configurations, packets that arrive at the 

Layer 2 Ethernet interface and match the packet matching rule will be forwarded through the created 

MPLS L2VPN connection. 

Before configuring an MPLS L2VPN connection based on Layer 2 Ethernet interface and VLAN, 

complete these tasks: 

z 

Configuring IGP on the PEs and P devices to guarantee the IP connectivity of the MPLS backbone 

z 

Configuring MPLS basic capability and MPLS LDP for the MPLS backbone on the PEs and P 

devices to establish LDP LSPs 

z 

Enabling MPLS L2VPN on the PEs 

To configure an MPLS L2VPN connection based on Layer 2 Ethernet interface and VLAN, you need the 

following data: 

z 

Types and numbers of the interfaces connecting the CEs