Инструкции По Установке для 3com S7906E

 

1-16 

Display hybrid ports or trunk 
ports on the device 

display port { hybrid | trunk } 

Available in any view

Display MAC address-to-VLAN 
entries 

display mac-vlan { all | dynamic | 
mac-address mac-address [ mask 
mac-mask ] | static | vlan vlan-id } 

Available in any view

Display all interfaces with 
MAC-based VLAN enabled 

Available in any view

Display protocol information 
and protocol indexes of the 
specified VLANs 

display protocol-vlan vlan 

{ 

-

[

 to 

-

]

 | all

 }

Available in any view

Display protocol-based VLAN 
information on specified 
interfaces 

display protocol-vlan interface 
{ interface-type interface-number [ to 
interface-type interface-number ] | all } 

Available in any view

Display IP subnet-based VLAN 
information and IP subnet 
indexes of specified VLANs 

display ip-subnet-vlan vlan { vlan-id 
[ to vlan-id ] | all } 

Available in any view

Display the IP subnet-based 
VLAN information and IP 
subnet indexes of specified 
ports 

 

{ 

 | 

 }

Available in any view

Clear statistics on a port 

reset counters interface 

[ 

[ 

] ]

Available in user view

 

The reset counters interface command can be used to clear statistics on a VLAN interface. For more 

information, refer to Ethernet Interface Commands in the Access Volume.

  

 

z 

Device A connects to Device B through a trunk port GigabitEthernet 2/0/1; 

z 

The default VLAN ID of GigabitEthernet 2/0/1 is 100; 

z 

GigabitEthernet 2/0/1 allows packets from VLAN 2, VLAN 6 through VLAN 50, and VLAN 100 to 

pass through. 

Figure 1-4 Network diagram for port-based VLAN configuration 

 

 

1)  Configure Device A