Инструкции По Установке для 3com S7906E

 

9-1 

When configuring traffic redirecting, go to these sections for information you are interested in: 

z 

Traffic Redirecting Overview 

z 

Traffic redirecting is the action of redirecting the packets matching the specific match criteria to a 

certain location for processing.  

Currently, the following four traffic redirecting actions are supported: 

z 

Redirecting traffic to the CPU: redirects packets which require processing by CPU to the CPU.  

z 

Redirecting traffic to an interface: redirects packets which require processing by an interface to the 

interface. Note that this action is applicable to only Layer 2 packets, and the target interface should 

be a Layer 2 interface.  

z 

Redirecting traffic to the next hop: redirects packets which require processing by an interface to the 

interface. This action is applicable to only Layer 3 packets.  

Follow these steps to configure traffic redirecting: 

Enter system view 

system-view 

— 

Create a class and enter 
class view 

traffic classifier tcl-name [ operator 
{ and | or } ] 

— 

Configure the match criteria 

if-match match-criteria 

— 

Exit class view 

— 

Create a behavior and enter 
behavior view 

traffic behavior behavior-name 

Required 

Configure a traffic 
redirecting action 

redirect { cpu | interface 
interface-type interface-number | 
next-hop { ipv4-add1 [ ipv4-add2 ] | 
ipv6-add1 [ interface-type 
interface-number ] [ ipv6-add2 
[ interface-type interface-number ] ] } 

Optional 

Exit behavior view 

— 

Create a policy and enter 
policy view 

qos policy policy-name 

— 

Associate the class with the 
traffic behavior in the QoS 
policy 

classifier tcl-name behavior 
behavior-name 

— 

Exit policy view 

—