Инструкции По Установке для 3com S7906E

 

1-2 

 

Before creating a user profile, you need to configure authentication parameters. User profile supports 

802.1X and portal authentications. You can select one of them to authenticate users based on the 

actual networking when users access the network. However, you need to perform the related 

configurations (for example, username, password, authentication scheme, domain and binding 

between a user profile and user) on the client, the device and authentication server. 

Follow these steps to create a user profile: 

Enter system view 

— 

Create a user profile, and enter 
its view 

user-profile profile-name 

Required 

If the specified user profile 
already exists, you will directly 
enter the corresponding user 
profile view. 

The configuration made in user 
profile view takes effect when 
the user profile is enabled and 
a user using the user profile 
goes online. 

 

After a user profile is created, you need to apply a QoS policy in user profile view to implement 

restrictions on the online users.  

Follow these steps to apply the QoS policy to online users: 

Enter system view 

system-view 

— 

Enter user profile view 

user-profile profile-name 

Required 

The configuration made in user 
profile view takes effect when 
the user-profile is activated 
and there are online users.  

Apply the QoS policy 

qos apply policy policy-name 
{ inbound | outbound } 

Required 

Use the inbound keyword to 
apply the QoS policy to the 
traffic received by the online 
users. Use the outbound 
keyword to apply the QoS 
policy to the traffic sent by the 
online users.