Инструкции По Установке для 3com S7906E

 

1-4 

Configure the username 
and password for MAC 
authentication 

mac-authentication 
user-name-format { fixed 
[ account name ] [ password 
{ cipher | simple } password ] | 
mac-address [ { with-hyphen | 
without-hyphen } [ lowercase | 
uppercase ] ] } 

Optional 

By default, the user’s source 
MAC address (in lower case) 
with “-” serves as the username 
and password. 

interface interface-type 
interface-number 

Set the maximum number 
of concurrent MAC 
authentication users 
allowed on a port 

mac-authentication max-user 
user-number 

Optional 

By default, the maximum 
number allowed on a port is 
1024. 

 

z 

You can configure MAC authentication for ports first. However, the configuration takes effect only 

after you enable MAC authentication globally.  

z 

Enabling MAC authentication on a port is mutually exclusive with adding the port to an aggregation 

group and adding the port to a service loopback group.  

z 

For details about the default ISP domain, refer to AAA Configuration in the Security Volume. 

 

Display the global MAC 
authentication information or 
the MAC authentication 
information about specified 
ports 

display mac-authentication 
[ interface interface-list ] 

Available in any view 

Clear the MAC authentication 
statistics 

reset mac-authentication 
statistics [ interface 
interface-list ] 

Available in user view 

 

As illustrated in 

, a supplicant is connected to the device through port GigabitEthernet 2/0/1. 

z 

Local MAC authentication is required on every port to control user access to the Internet.  

z 

All users belong to domain aabbcc.net.  

z 

Local users use their MAC addresses as the usernames and passwords for authentication.  

z 

Set the offline detect timer to 180 seconds and the quiet timer to 3 minutes.