Инструкции По Установке для 3com S7906E

 

1-8 

          Offline detect period is 180s 

          Quiet period is 180s. 

          Server response timeout value is 100s 

          The max allowed user number is 2048 per slot 

          Current user number amounts to 1 

          Current domain is 2000 

Silent Mac User info: 

         MAC ADDR               From Port           Port Index 

GigabitEthernet2/0/1 is link-up 

  MAC address authentication is enabled 

  Authenticate success: 1, failed: 0 

 Max number of on-line users is 1024 

  Current online user number is 1 

          MAC Addr         Authenticate state           Auth Index 

          00e0-fc12-3456   MAC_AUTHENTICATOR_SUCCESS     29 

<Device> display connection 

Slot:  2 

Index=29  ,Username=aaa@2000 

 IP=N/A 

 MAC=00e0-fc12-3456 

 

 Total 1 connection(s) matched on slot 2. 

 Total 1 connection(s) matched. 

As shown in 

, a host is connected to port GigabitEthernet 2/0/1 of the switch and must pass 

MAC authentication to access the Internet.  

z 

Specify to use the MAC address of a user as the username and password for MAC authentication 

of the user. 

z 

Configure the RADIUS server to assign ACL 3000.  

z 

On port GigabitEthernet 2/0/1 of the switch, enable MAC authentication and configure ACL 3000. 

After the host passes MAC authentication, the RADIUS server assigns ACL 3000 to port 

GigabitEthernet 2/0/1 of the switch. As a result, the host can access the Internet but cannot access the 

FTP server, whose IP address is 10.0.0.1.