Инструкции По Установке для 3com S7906E

 

1-20 

z 

Switch A is configured for Layer 3 portal authentication. Before portal authentication, users can 

access only the portal server. After passing portal authentication, they can access unrestricted 

Internet resources. 

z 

The host accesses Switch A through Switch B 

z 

A RADIUS server serves as the authentication/accounting server. 

Figure 1-11 Configure Layer 3 portal authentication 

 

 

 

z 

You need to configure IP addresses for the devices as shown in 

 and ensure that routes 

are available between devices. 

z 

Perform configurations on the RADIUS server to ensure that the user authentication and 

accounting functions can work normally. 

 

Configure Switch A: 

1)  Configure a RADIUS scheme 

# Create a RADIUS scheme named rs1 and enter its view.  

<SwitchA> system-view 

[SwitchA] radius scheme rs1 

# Set the server type for the RADIUS scheme. When using the iMC server, you need set the server type 

to extended.  

[SwitchA-radius-rs1] server-type extended 

# Specify the primary authentication server and primary accounting server, and configure the keys for 

communication with the servers. 

[SwitchA-radius-rs1] primary authentication 192.168.0.112 

[SwitchA-radius-rs1] primary accounting 192.168.0.112 

[SwitchA-radius-rs1] key authentication radius