Инструкции По Установке для 3com S7906E

 

1-27 

Figure 1-14 Configure Layer 3 portal authentication with extended functions 

 

 

 

z 

You need to configure IP addresses for the devices as shown in 

 and ensure that routes 

are available between devices. 

z 

Perform configurations on the RADIUS server to ensure that the user authentication and 

accounting functions can work normally. 

 

Configure Switch A: 

1)  Configure a RADIUS scheme 

# Create a RADIUS scheme named rs1 and enter its view.  

<SwitchA> system-view 

[SwitchA] radius scheme rs1 

# Set the server type for the RADIUS scheme. When using the iMC server, you need set the server type 

to extended.  

[SwitchA-radius-rs1] server-type extended 

# Specify the primary authentication server and primary accounting server, and configure the keys for 

communication with the servers. 

[SwitchA-radius-rs1] primary authentication 192.168.0.112 

[SwitchA-radius-rs1] primary accounting 192.168.0.112 

[SwitchA-radius-rs1] key accounting radius 

[SwitchA-radius-rs1] key authentication radius 

[SwitchA-radius-rs1] user-name-format without-domain 

# Configure the IP address of the security policy server.  

[SwitchA-radius-rs1] security-policy-server 192.168.0.113 

[SwitchA-radius-rs1] quit 

2)  Configure an authentication domain 

# Create an ISP domain named dm1 and enter its view.