Инструкции По Установке для 3com S7906E

 

1-4 

Besides password authentication and publickey authentication, SSH2.0 provides another two 

authentication methods:  

z 

password-publickey: Performs both password authentication and publickey authentication if the 

client is using SSH2.0 and performs either if the client is running SSH1. 

z 

any: Performs either password authentication or publickey authentication. 

 

After passing authentication, the client sends a session request to the server, while the server listens to 

and processes the request from the client. After successfully processing the request, the server sends 

back to the client an SSH_SMSG_SUCCESS packet and goes on to the interactive session stage with 

the client. Otherwise, the server sends back to the client an SSH_SMSG_FAILURE packet, indicating 

that the processing fails or it cannot resolve the request. 

In this stage, the server and the client exchanges data in the following way: 

z 

The client encrypts and sends the command to be executed to the server. 

z 

The server decrypts and executes the command, and then encrypts and sends the result to the 

client. 

z 

The client decrypts and displays the result on the terminal. 

 

z 

In the interaction stage, you can execute commands from the client by pasting the commands in 

text format (the text must be within 2000 bytes). It is recommended that the commands are in the 

same view; otherwise, the server may not be able to perform the commands correctly.  

z 

If the command text exceeds 2000 bytes, you can execute the commands by saving the text as a 

configuration file, uploading the configuration file to the server through SFTP, and then using the 

configuration file to restart the server. 

 

Complete the following tasks to configure an SSH server: 

Generating a DSA or RSA Key Pair 

Required 

Enabling SSH Server 

Required 

Required