Инструкции По Установке для 3com S7906E
2-9
# Upload the local file pu to the server, save it as puk, and check if the file has been uploaded
successfully.
sftp-client> put pu puk
Local file:pu ---> Remote file: /puk
Uploading file successfully ended
sftp-client> dir
-rwxrwxrwx 1 noone nogroup 1759 Aug 23 06:52 config.cfg
-rwxrwxrwx 1 noone nogroup 225 Aug 24 08:01 pubkey2
-rwxrwxrwx 1 noone nogroup 283 Aug 24 07:39 pubkey
drwxrwxrwx 1 noone nogroup 0 Sep 01 06:22 new
drwxrwxrwx 1 noone nogroup 0 Sep 02 06:33 new2
-rwxrwxrwx 1 noone nogroup 283 Sep 02 06:35 pub
-rwxrwxrwx 1 noone nogroup 283 Sep 02 06:36 puk
sftp-client>
# Terminate the connection to the remote SFTP server.
sftp-client> quit
Bye
Connection closed.
<SwitchA>
SFTP Server Configuration Example
Network requirements
As shown in
, an SSH connection is established between the host and the switch. The host,
an SFTP client, logs into the switch for file management and file transfer. An SSH user uses password
authentication with the username being client002 and the password being aabbcc. The username and
password are saved on the switch.
Figure 2-2 Network diagram for SFTP server configuration
SFTP client
SFTP server
Host
Switch
192.168.1.56/24
Vlan-int1
192.168.1.45/24
Configuration procedure
1) Configure the SFTP server
# Generate RSA and DSA key pairs and enable the SSH server.
<Switch> system-view
[Switch] public-key local create rsa
[Switch] public-key local create dsa
[Switch] ssh server enable
# Enable the SFTP server.
[Switch] sftp server enable