Инструкции По Установке для 3com S7906E

 

1-8 

Configure the errored frame 
seconds event triggering 
threshold 

oam errored-frame-seconds 
threshold threshold-value 

Optional 

1 by default 

 

Make sure the errored frame seconds triggering threshold is less than the errored frame seconds 

detection interval. Otherwise, no errored frame seconds event can be generated.  

 

After enabling OAM remote loopback on a port, you can send loopback frames from the port to a remote 

port and then observe how many of these loopback frames are returned. In this way, you can calculate 

the packet loss ratio on the link, thus evaluating the link performance.  

Follow these steps to enable Ethernet OAM remote loopback: 

Enter system view 

System-view 

— 

Enter Ethernet port view 

interface interface-type 
interface-number 

— 

Enable Ethernet OAM remote 
loopback 

Required 

Disabled by default.