Инструкции По Установке для 3com S7906E

 

4-5 

z 

The authentication mode for login users has been configured on the AUX user interface.  

z 

The modem dialup configuration environment is ready.  

Follow these steps to configure the switch-side modem: 

Enter system view 

— 

Enter AUX user interface view 

user-interface aux 
first-number [ last-number ] 

— 

Enable the modem to accept 
incoming calls, initiate outgoing 
calls, or both 

modem [ both | call-in | 
call-out ] 

Required 

Configure the modem to 
operate in the auto-answer 
mode 

modem auto-answer 

Optional 

Manual answer mode applies 
by default. 

Set the maximum amount of 
time that the modem waits for 
the carrier signal after the 
off-hook action during incoming 
call connection setup 

modem timer answer 
seconds 

Optional 

30 seconds by default 

 

Configure the switch-side modem to allow both incoming calls and outgoing calls, and configure the 

modem to operate in the auto-answer mode. Set the timeout time that the modem waits for the carrier 

signal after the off-hook action during incoming call connection setup to 45 seconds.  

See 

# Enter AUX user interface view.  

<Sysname> system-view 

System View: return to User View with Ctrl+Z. 

[Sysname] user-interface aux 0 

# Configure the modem to allow both incoming calls and outgoing calls.  

[Sysname-ui-aux0] modem both 

# Configure the modem to operate in the auto-answer mode.  

[Sysname-ui-aux0] modem auto-answer 

# Set the timeout time to 45 seconds.  

[Sysname-ui-aux0] modem timer answer 45