Инструкции По Установке для 3com S7906E

 

1-1 

While performing basic configurations of the system, go to these sections for information you are 

interested in: 

z 

z 

Basic Configurations 

z 

To avoid duplicate configuration, you can use the display commands to view the current configuration 

of the device before configuring the device. The configurations of a device fall into the following 

categories: 

z 

Factory defaults: When devices are shipped, they are installed with some basic configurations, 

which are called factory defaults. These default configurations ensure that a device can start up 

and run normally when it has no configuration file or the configuration file is damaged. 

z 

Current configuration: The currently running configuration on the device. 

z 

Saved configuration: Configurations saved in the startup configuration file. 

Follow these steps to display device configurations: 

Display the current validated 
configurations of the device 

display current-configuration 
[ [ configuration [ configuration ] | 
interface [ interface-type ] 
[ interface-number ] ] [ by-linenum ] [ | 
{ begin | exclude | include } 
regular-expression ] ] 

Display the configuration saved 
on the storage media of the 
device 

display saved-configuration 
[ by-linenum ] 

Available in any view.

 

For details of the display saved-configuration command, refer to File System Management 

Commands in the System Volume. 

 

This section covers the following topics: 

z 

Entering System View