Инструкции По Установке для 3com S7906E

 

2-3 

Enable configuration file 
auto-save 

Optional 

Enabled by default. 

 

If you execute the save  filename  command and press Enter, the system saves the current 

configuration to the specified path, but the SMB does not save the configuration. 

 

z 

Fast saving mode. This is the mode when you use the save command without the safely keyword. 

The mode saves the file more quickly but is likely to lose the existing configuration file if the device 

reboots or the power fails during the process. 

z 

Safe mode. This is the mode when you use the save command with the safely keyword. The mode 

saves the file more slowly but can retain the configuration file in the device even if the device 

reboots or the power fails during the process. 

The fast saving mode is suitable for environments where power supply is stable. The safe mode, 

however, is preferred in environments where stable power supply is unavailable or remote maintenance 

is involved. 

Follow the steps below to save the current configuration (distributed device): 

Save the current configuration 
to the specified file, but the 
configuration file will not be set 
as the file for the next startup 

save file-url [ all | slot 
slot-number ] 

Save the current configuration 
to the root directories of the 
storage media of the AMB and 
SMB and specify the file as the 
startup configuration file that 
will be used at the next system 
startup 

save [ safely ] 

Required 

Use either command 

Available in any view.