Инструкции По Установке для 3com S7906E

 

1-8 

Configure the output rules of 
system information 

info-center source 
{ module-name | default } 
channel { channel-number | 
channel-name } [ debug { level 
severity | state state } * | log 
{ level severity | state state } * | 
trap { level severity | state 
state } * ] * 

Optional 

Refer to 

. 

Configure the format of the time 
stamp 

info-center timestamp 
{ debugging | log | trap } 
{ boot | date | none } 

Optional 

The time stamp format for log, 
trap and debugging information 
is date by default. 

 

After setting to output system information to the console, you need to enable the associated display 

function to display the output information on the console. 

Follow these steps in user view to enable the display of system information on the console: 

Enable the monitoring of 
system information on the 
console 

Optional 

Enabled on the console and 
disabled on the monitor 
terminal by default. 

Enable the display of 
debugging information on the 
console 

Required 

Disabled by default 

Enable the display of log 
information on the console 

Optional 

Enabled by default 

Enable the display of trap 
information on the console 

Optional 

Enabled by default 

 

System information can also be output to a monitor terminal, which is a user terminal that has login 

connections through the AUX and VTY user interface. 

Enter system view 

— 

Enable information center 

info-center enable 

Optional 

Enabled by default 

Name the channel with a 
specified channel number 

info-center channel 
channel-number name 
channel-name 

Optional 

Refer to 

channel names.