Инструкции По Установке для 3com S7906E

 

1-22 

Set the lifetime of the 
history records in an NQA 
test group 

history-record keep-time keep-time 

Optional 

By default, the history 
records in the NQA test 
group are kept for 120 
minutes. 

Configure the maximum 
number of history records 
that can be saved in a test 
group 

history-record number number 

Optional 

By default, the maximum 
number of records that can 
be saved in a test group is 
50 

 

Optional parameters common to an NQA test group are valid only for tests in this test group. 

Unless otherwise specified, the following parameters are applicable to all test types and they can be 

configured according to the actual conditions. 

Follow these steps to configure optional parameters common to an NQA test group: 

Enter system view 

system-view 

— 

Enter NQA test group view 

nqa entry admin-name 
operation-tag 

— 

Enter test type view of a test 
group 

type { dhcp | dlsw | dns | ftp | 
http | icmp-echo | snmp | tcp | 
udp-echo | udp-jitter | voice }

— 

Configure the descriptive string 
for a test group 

description text 

Optional 

By default, no descriptive string 
is available for a test group. 

Configure the interval between 
two consecutive tests for a test 
group 

frequency interval 

Optional 

By default, the interval between 
two consecutive tests for a test 
group is 0 milliseconds, that is, 
only one test is performed. 

If the last test is not completed 
when the interval specified by 
the frequency command is 
reached, a new test is not 
started. 

Configure the number of 
probes in an NQA test 

probe count times 

Optional 

By default, one probe is 
performed in a test. 

Only one probe can be made in 
one voice test. Therefore, this 
command is not available in a 
voice test.