Инструкции По Установке для 3com S7906E

 

1-1 

 

The 3Com S7900E Series Ethernet Switches are distributed devices supporting Intelligent Resilient 

Framework (IRF). Two S7900E series can be connected together to form a distributed IRF device. If an 

S7900E series is not in any IRF, it operates as a distributed device; if the S7900E series is in an IRF, it 

operates as a distributed IRF device. For introduction of IRF, refer to IRF Configuration in the System 

Volume. 

 

When configuring OAP, go to these sections for information you are interested in: 

z 

z 

Open Application Platform (OAP) cards are a series of products developed by 3Com based on the 

Open Application Architecture (OAA) of 3Com. The S7900E series support multiple types of OAP cards 

such as IPS, ACG, FW, NS, LB, AFC and AFD. 

An OAP card runs an independent CPU and storage medium to load software of different functions. 

Meanwhile, after an OAP card is installed into the switch, it can quickly implement applications such as 

security and wireless control, which satisfies users’ diversified needs. In this way, different types of 

applications can be integrated into one device, thus facilitating network and services deployment and 

greatly reducing cost at the same time. 

You can redirect to the operating system of an OAP card from the switch after the OAP card is installed 

on the switch. In this way, the terminal display interface will be switched from the command line 

interface on the switch to the operating interface of the software system on the OAP card, and you can 

manage the system and application software of the OAP card on the switch. After the operating 

interface switch, you can press Ctrl+K to return to the command line interface on the switch. 

Follow the step to redirect from the switch to the software system on the OAP card: