Инструкции По Установке для 3com S7906E
1-1
1
Ethernet Port Configuration
The S7900E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7900E series can be connected together to form a distributed IRF device. For
introduction of IRF, refer to IRF in the System Volume.
When configuring Ethernet ports, go to these sections for information you are interested in:
z
z
Ethernet Port Configuration
Combo Port Configuration
Introduction to Combo ports
A Combo port comprises an optical (fiber) port or an electrical (copper) port. The two ports share one
forwarding port and thus they cannot work at the same time. If the electrical port is enabled, the optical
port is disabled automatically and vice versa.
The 1000/100-Mbps SFP port of a Combo port does not support hot swappable SFP-GE-T modules.
For details about hot swappable modules, see 3Com S7900E Family Getting Started Guide.
Configuring Combo port state
Follow these steps to configure the state of a Combo port:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
interface-number
—
Enable a specified Combo port
undo shutdown
Optional
By default, of the two ports in a
Combo port, the one with a
smaller port ID is enabled.
Combo port, the one with a
smaller port ID is enabled.