Инструкции По Установке для 3com S7906E
1-1
1
IPv6 Basics Configuration
When configuring IPv6 basics, go to these sections for information you are interested in:
z
z
z
z
z
z
z
z
z
z
z
The S7900E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7900E series can be connected together to form a distributed IRF device.
If an S7900E series is not in any IRF, it operates as a distributed device; if the S7900E series is in
an IRF, it operates as a distributed IRF device. For introduction of IRF, refer to IRF Configuration in
the System Volume.
z
EA boards (such as LSQ1GP12EA and LSQ1TGX1EA) do not support IPv6 features.
IPv6 Overview
Internet Protocol Version 6 (IPv6), also called IP next generation (IPng), was designed by the Internet
Engineering Task Force (IETF) as the successor to Internet Protocol Version 4 (IPv4). The significant
difference between IPv6 and IPv4 is that IPv6 increases the IP address size from 32 bits to 128 bits.
This section covers the following:
z
z
z
z
z
z