Инструкции По Установке для 3com S7906E

 

1-24 

[SwitchA] ipv6 

[SwitchA] bgp 100 

[SwitchA-bgp] router-id 1.1.1.1 

[SwitchA-bgp] ipv6-family 

[SwitchA-bgp-af-ipv6] peer 100::2 as-number 200 

[SwitchA-bgp-af-ipv6] network 1:: 64 

#Configure Switch B. 

<SwitchB> system-view  

[SwitchB] ipv6 

[SwitchB] bgp 200 

[SwitchB-bgp] router-id 2.2.2.2 

[SwitchB-bgp] ipv6-family 

[SwitchB-bgp-af-ipv6] peer 100::1 as-number 100 

[SwitchB-bgp-af-ipv6] peer 101::1 as-number 200 

[SwitchB-bgp-af-ipv6] peer 101::1 next-hop-local 

# Configure Switch C. 

<SwitchC> system-view  

[SwitchC] ipv6 

[SwitchC] bgp 200 

[SwitchC-bgp] router-id 3.3.3.3 

[SwitchC-bgp] ipv6-family  

[SwitchC-bgp-af-ipv6] peer 101::2 as-number 200 

[SwitchC-bgp-af-ipv6] peer 102::2 as-number 200 

# Configure Switch D. 

<SwitchD> system-view  

[SwitchD] ipv6 

[SwitchD] bgp 200 

[SwitchD-bgp] router-id 4.4.4.4 

[SwitchD-bgp] ipv6-family 

[SwitchD-bgp-af-ipv6] peer 102::1 as-number 200 

3)  Configure route reflector 

# Configure Switch C as a route reflector, Switch B and Switch D as its clients. 

[SwitchC-bgp-af-ipv6] peer 101::2 reflect-client 

[SwitchC-bgp-af-ipv6] peer 102::2 reflect-client 

Use the display bgp ipv6 routing-table command on Switch B and Switch D respectively, you can find 

both of them have learned the network 1::/64. 

Display BGP peer information using the display bgp ipv6 peer command. The state of the connection 

to the peer cannot become established.