Справочное Руководство для 3com S7906E

 

1-26 

ipv6-address: IPv6 address. 

prefix-length: Prefix length of the address, in the range 0 to 128. 

short-cut: If the keyword is specified for an EBGP route, the route will use the local routing 

management value rather than that of EBGP routes, so the preference of the route is reduced. 

route-policy-name: Name of a routing policy, a string of 1 to 19 characters. 

Use the network command to advertise a network to the IPv6 BGP routing table.  

Use the undo network command to remove an entry from the IPv6 BGP routing table. 

By default, no route is advertised. 

Note that: 

z 

The route to be advertised must exist in the local IP routing table, and using a routing policy makes 

route management more flexible. 

z 

The route advertised to the BGP routing table using the network command has the IGP origin 

attribute. 

# Advertise the network 2002::/16 into the IPv6 BGP routing table. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] network 2002:: 16 

peer { group-name | ipv4-address | ipv6-address } advertise-community 

undo peer { group-name | ipv4-address | ipv6-address } advertise-community 

IPv6 address family view 

2: System level 

group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters. 

ipv4-address: IPv4 address of a peer. 

ipv6-address: IPv6 address of a peer. 

Use the peer advertise-community command to advertise the community attribute to a peer/peer 

group.