Справочное Руководство для 3com S7906E

 

1-22 

criteria of the node and the apply clauses define the actions to be taken on packets passing the node. 

The relation between the if-match clauses of a node is logic AND, namely, all the if-match clauses must 

be satisfied. The relation between different route policy nodes is logic OR, namely, a packet passing a 

node passes the route policy.  

Related commands: if-match interface,  if-match acl,  if-match ip-prefix,  if-match ip next-hop, 

if-match cost, if-match tag, apply ip-address next-hop, apply local-preference, apply cost, apply 

origin, apply tag.  

# Configure node 10 in permit mode of route policy policy1 and enter route policy view.  

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] 

apply ip-address next-hop ip-address 

undo apply ip-address next-hop 

Route policy view 

2: System level 

ip-address: IP address of the next hop.  

Use the apply ip-address next-hop command to set a next hop for IPv4 routing information.  

Use the undo apply ip-address next-hop command to remove the clause configuration.  

No next hop is set for IPv4 routing information by default.  

This command cannot set a next hop for redistributed routes.  

Related commands: if-match interface,  if-match acl,  if-match ip-prefix,  if-match ip next-hop, 

if-match cost, if-match tag, route-policy, apply local-preference, apply cost, apply origin, apply 

tag. 

# Configure node 10 in permit mode of route policy policy1 to set next hop 193.1.1.8 for routes 

matching AS-PATH list 1. 

<Sysname> system-view 

[Sysname] route-policy policy1 permit node 10 

[Sysname-route-policy] if-match as-path 1