Справочное Руководство для 3com S7906E

 

1-9 

     Route selection rule: preference-preferred 

     Load splitting rule: disable 

Table 1-6 display multicast rpf-info command output description  

RPF information about source 
192.168.1.55 

Information of the RPF path to multicast source 192.168.1.55 

RPF interface 

RPF interface  

RPF neighbor 

IP address of the RPF neighbor 

Referenced route/mask 

Referenced route and its mask length  

Referenced route type 

Type of the referenced route, which can be any of the following: 

z 

igp: unicast route (IGP) 

z 

egp: unicast route (BGP) 

z 

unicast (direct): unicast route (directly connected) 

z 

unicast: other unicast route (such as unicast static route) 

z 

mbgp: MBGP route 

z 

multicast static: multicast static route  

Route selection rule 

Rule for RPF route selection, which can be based on the 
preference of the routing protocol or based on the longest match 
on the destination address  

Load splitting rule 

Status of the load splitting rule (enabled/disabled)  

 

ip rpf-route-static [  vpn-instance  vpn-instance-name ] source-address { mask  | mask-length } 

[  protocol [ process-id ] ] [ route-policy  policy-name ] { rpf-nbr-address | interface-type 

interface-number } [ preference preference ] [ order order-number ] 

undo ip rpf-route-static [ vpn-instance vpn-instance-name ] source-address { mask | mask-length } 

[ protocol [ process-id ] ] [ route-policy policy-name ] 

System view 

2: System level 

vpn-instance vpn-instance-name: Specifies a VPN instance. A VPN instance name is a case sensitive 

string of up to 31 characters and must not contain any space.. 

source-address: Multicast source address.  

mask: Mask of the multicast source address.  

mask-length: Mask length of the multicast source address, in the range of 0 to 32.  

protocol: Routing protocol, which can have any of the following values: