Справочное Руководство для 3com S7906E
1-12
Total number of packets for this source-group pair: 8100
Protocol: PIM
Forwarding TTL: 0
Forwarding code: No error
Table 1-7 mtracert command output description
Field
Description
(6.6.6.6, 225.2.1.1)
The (S, G) multicast stream for which the
forwarding path is being traced
forwarding path is being traced
-1 5.5.5.8
The (S, G) outgoing interface address of each
hop, starting from the last-hop router
hop, starting from the last-hop router
Incoming interface address
The address of the interface on which the (S, G)
packets arrive
packets arrive
Previous-hop router address
The IP address of the router from which this
router receives packets from this source
router receives packets from this source
Input packet count on incoming interface
The total number of multicast packets received
on the incoming interface
on the incoming interface
Output packet count on outgoing interface
The total number of multicast packets
transmitted on the outgoing interface
transmitted on the outgoing interface
Total number of packets for this source-group
pair
pair
The total number of packets from the specified
source forwarded by this router to the specified
group
source forwarded by this router to the specified
group
Protocol
The multicast routing protocol in use
Forwarding TTL
The minimum TTL that a packet is required to
have before it can be forwarded over the
outgoing interface
have before it can be forwarded over the
outgoing interface
multicast boundary
Syntax
multicast boundary group-address { mask | mask-length }
undo multicast boundary { group-address { mask | mask-length } | all }
View
Interface view
Default Level
2: System level
Parameters
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
mask: Mask of the multicast group address.
mask-length: Mask length of the multicast group address, in the range of 4 to 32.
all: Specifies to remove all forwarding boundaries configured on the interface.