Справочное Руководство для 3com S7906E

 

1-34 

peer { ipv6-group-name | ipv6-address } filter-policy acl6-number { import | export } 

undo peer { ipv6-group-name | ipv6-address } filter-policy [ acl6-number ] { import | export } 

IPv6 MBGP address family view 

2: System level 

ipv6-group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of an IPv6 MBGP peer. 

acl6-number: IPv6 ACL number, in the range 2000 to 3999. 

import: Applies the filter to routes received from the IPv6 MBGP peer/peer group. 

export: Applies the filter to routes advertised to the IPv6 MBGP peer/peer group. 

Use the peer filter-policy command to configure an IPv6 ACL-based filter policy for an IPv6 MBGP 

peer or peer group.  

Use the undo peer filter-policy command to remove the configuration. 

By default, no IPv6 ACL-based filter policy is configured for any IPv6 MBGP peer or peer group. 

# Apply IPv6 ACL 2000 to filter routes advertised to the IPv6 MBGP peer 1:2::3:4. 

<Sysname> system-view 

[Sysname] acl ipv6 number 2000 

[Sysname-acl6-basic-2000] rule permit source 2001:1:: 64 

[Sysname-acl6-basic-2000] quit 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100 

[Sysname-bgp-af-ipv6] quit 

[Sysname-bgp] ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable 

[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 filter-policy 2000 export 

peer ipv6-address group ipv6-group-name  

undo peer ipv6-address group ipv6-group-name