Справочное Руководство для 3com S7906E

 

1-41 

Use the peer route-limit command to set the maximum number of IPv6 prefixes that can be received 

from an IPv6 MBGP peer/peer group.  

Use the undo peer route-limit command to restore the default. 

By default, the IPv6 prefixes from an IPv6 MBGP peer/peer group are unlimited. 

The router will tear down the TCP connection when the number of IPv6 prefixes received from the peer 

exceeds the limit. 

# Set the number of IPv6 address prefixes allowed to receive from the IPv6 MBGP peer 1:2::3:4 to 

10000. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv6-family 

[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100 

[Sysname-bgp-af-ipv6] quit 

[Sysname-bgp] ipv6-family multicast 

[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable 

[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 route-limit 10000 

peer { ipv6-group-name | ipv6-address } route-policy route-policy-name { import | export } 

undo peer { ipv6-group-name | ipv6-address } route-policy route-policy-name { import | export } 

IPv6 MBGP address family view 

2: System level 

ipv6-group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters. 

ipv6-address: IPv6 address of an IPv6 MBGP peer. 

route-policy-name: Route policy name, a string of 1 to 19 characters. 

import: Applies the route-policy to routes received from the IPv6 MBGP peer/peer group. 

export: Applies the route-policy to routes advertised to the IPv6 MBGP peer/peer group. 

Use the peer route-policy command to apply a route policy to routes incoming from or outgoing to an 

IPv6 MBGP peer or peer group.  

Use the undo peer route-policy command to remove the configuration.