Справочное Руководство для 3com S7906E
1-4
1024:...$.... ........ ........ ........ ........ ........ ........ ........
1088:........ ........ ........ ........ ........ ........ ........ ........
1152:........ ........ ........ ........ ........ ........ ........ ........
1216:........ ........ ........ ........ ........ ........ ........ ........
1280:........ ........ ........ ........ ........ ........ ........ ........
1344:........ ........ ........ ........ ........ ........ ........ ........
1408:........ ........ ........ ........ ........ ........ ........ ........
1472:........ ........ ........ .....
display mpls ldp
Syntax
display mpls ldp [ all [ verbose ] ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays all information about LDP .
verbose: Displays detailed information.
|: Uses a regular expression to filter the output information. For details about regular expression, refer to
Basic System Configuration in the System Volume.
begin: Displays all lines starting with the line that matches the regular expression.
exclude: Displays all lines other than those matching the regular expression..
include: Displays all lines matching the regular expression.
regular-expression: Regular expression, a case-sensitive string of 1 to 80 characters.
Description
Use the display mpls ldp command to display information about LDP.
If you do not specify any parameter, the command will display all information about LDP in detail.
Related commands: mpls ldp (system view), mpls ldp (interface view).
Examples
# Display all information about LDP in detail.
<Sysname> display mpls ldp all verbose
LDP Global Information
---------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : Off Recovery Timer : 60 Sec
LDP Instance Information