Справочное Руководство для 3com S7906E
1-13
After entering public key view, you can configure the peer public key with the public-key-code begin
and public-key-code end commands. This requires that you obtain the hexadecimal public key from
the peer beforehand.
Related commands: public-key-code begin, public-key-code end.
Examples
# Enter public key view, specifying a public key name of key1.
<Sysname> system-view
[Sysname] public-key peer key1
[Sysname-pkey-public-key]
public-key peer import sshkey
Syntax
public-key peer keyname import sshkey filename
undo public-key peer keyname
View
System view
Default Level
2: System level
Parameters
keyname: Public key name, a string of 1 to 64 characters.
filename: Public key file name. For detailed information about file name, refer to File System
Management in the System Volume.
Description
Use the public-key peer import sshkey command to import a peer public key from the public key file.
Use the undo public-key peer command to remove the setting.
After execution of this command, the system automatically transforms the public key file in SSH1,
SSH2.0 or OpenSSH format to PKCS format, and imports the peer public key. This requires that you get
a copy of the public key file from the peer through FTP/TFTP.
Examples
# Import a peer public key named key2 from public key file key.pub.
<Sysname> system-view
[Sysname] public-key peer key2 import sshkey key.pub
sftp
Syntax
sftp server [ port-number ] [ prefer-ctos-cipher { 3des | aes128 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] *