Справочное Руководство для 3com S7906E
1-25
Table 1-8 Description on the fields of the display acl ipv6 command
Field
Description
Basic IPv6 ACL 2001
The displayed information is about the basic IPv4 ACL 2001.
named flow
The name of the ACL is flow.
1 rule
The ACL contains one rule.
Acl's step is 5
The rules in this ACL are numbered in steps of 5.
5 times matched
Five matches for the rule. Only ACL matches performed by
software are counted.
software are counted.
The field appears as long as one match is found.
rule 0 comment This rule is used
in eth 2/0/1
in eth 2/0/1
The description of ACL rule 5 is “This rule is used in eth 2/0/1.”
reset acl ipv6 counter
Syntax
reset acl ipv6 counter { acl6-number | all | name acl6-name }
View
User view
Default Level
2: System level
Parameters
all: All basic and advanced IPv6 ACLs.
acl6-number: IPv6 ACL number, which must be in the following ranges:
z
2000 to 2999 for basic IPv6 ACLs
z
3000 to 3999 for advanced IPv6 ACLs
name acl6-name: Specifies the name of the ACL, which is a case insensitive string of 1 to 32 characters.
It must start with an English letter and cannot be the English word of all to avoid confusion.
Description
Use the reset acl ipv6 counter command to clear statistics about a specified or all IPv6 ACLs that are
referenced by upper layer software.
Examples
# Clear statistics about IPv6 ACL 2001, which is referenced by upper layer software.
<Sysname> reset acl ipv6 counter 2001
# Clear statistics about the IPv6 ACL named flow, which is referenced by upper layer software.
<Sysname> reset acl ipv6 counter name flow