Справочное Руководство для 3com S7906E

 

1-7 

count: Maximum number of MAC addresses that can be learned on a port, in the range 0 to 4096. When 

the argument takes 0, the VLAN is not allowed to learn MAC addresses.  

Use the mac-address max-mac-count command to configure the maximum number of MAC 

addresses that can be learned on an Ethernet port. 

Use the undo mac-address max-mac-count command to remove the restriction on the maximum 

number of MAC addresses that can be learned on an Ethernet port. 

By default, no maximum number of MAC addresses that can be learned on a port is configured. 

If the command is executed in interface view, the configuration takes effect on the current interface; if 

the command is executed in port group view, the configuration takes effect on all ports belonging to the 

port group. 

By using this command with the static MAC address function, you can disable an interface or a port 

group from learning MAC addresses, and only allow the packets with the specified destination address 

to pass, thus avoiding the access to the network from the illegal devices. 

The Layer-2 aggregate interface and member interface not support this function. 

 

Related commands: mac-address (system view), mac-address (Ethernet interface view), 

mac-address timer. 

# Set the maximum number of MAC addresses that can be learned on port GigabitEthernet 2/0/1 to 600. 

After this upper limit is reached, frames received with unknown destination MAC addresses on the port 

will not be forwarded. 

<Sysname> system-view 

[Sysname] interface gigabitethernet 2/0/1 

[Sysname-GigabitEthernet2/0/1] mac-address max-mac-count 600 

mac-address timer { aging seconds | no-aging } 

undo mac-address timer aging 

System view 

2: System level