Справочное Руководство для 3com S7906E

 

1-26 

 Configuring GigabitEthernet2/0/1... Done. 

[Sysname-Bridge-Aggregation1] port hybrid protocol-vlan vlan 2 0 

protocol-vlan [ protocol-index ] { at | ipv4 | ipv6 | ipx { ethernetii | llc | raw | snap } | mode { ethernetii 

etype etype-id | llc { dsap dsap-id [ ssap ssap-id ] | ssap ssap-id } | snap etype etype-id } } 

undo protocol-vlan { protocol-index [ to protocol-end ] | all } 

VLAN view 

2: System level 

at: Specifies the AppleTalk based VLAN. 

ipv4: Specifies the IPv4 based VLAN. 

ipv6: Specifies the IPv6 based VLAN. 

ipx: Specifies the IPX based VLAN. The keywords ethernetii, llc, raw, and snap are encapsulation 

formats for IPX. 

mode: Configures a user-defined protocol template for the VLAN, which could also have four 

encapsulation formats, namely, ethernetii, llc, raw, and snap. 

ethernetii etype etype-id: Specifies to match Ethernet II encapsulation format and the corresponding 

protocol type values. The etype-id argument is the protocol type ID of inbound packets, in the range 

0x0600 to 0xffff (excluding 0x0800, 0x809b, 0x8137, and 0x86dd). 

llc: Specifies to match the llc encapsulation format. 

dsap dsap-id: Specifies the destination service access point, in the range of 00 to 0xff. 

ssap ssap-id: Specifies the source service access point, in the range of 00 to 0xff. 

snap etype etype-id: Specifies to match SNAP encapsulation format and the corresponding protocol 

type values. The etype-id argument is the Ethernet type of inbound packets, in the range 0x0600 to 

0xffff (excluding ipx snap under the snap encapsulation format). 

protocol-index: Protocol index, which specifies the protocol template to be bound with the current VLAN, 

in the range 0 to 15. System will automatically assign an index if this parameter is not specified. 

to protocol-end: Specifies the end protocol index, in the range 0 to 15. The protocol-end argument must 

be greater than or equal to the protocol-index argument. 

all: Specifies to remove all the protocols bound with the current VLAN.